|
Our
laser marking leaves a permanent high contrast black mark
on stainless steel by using a process of laser welding on
ceramic type material to the face of the nameplate or
panel
|
Test
results are shown below:-
Laser
marks were made on type
304 stainless steel tags
using a CO2 Laser.
Tags
were totally immersed in the test solutions.
|
|
|
|
|
|
Exposure
Time |
|
|
|
|
|
|
| Organic
Solvents |
|
1
Hour |
12
Hours |
24
Hours |
1
Week |
| Gasoline |
|
No effect |
No effect |
No effect |
No effect |
| Limonene |
|
No effect |
No effect |
No effect |
No effect |
| Methyl
Ethyl Ketone |
|
No effect |
No effect |
No effect |
No effect |
| N-Butanol |
|
No effect |
No effect |
No effect |
No effect |
| Mineral
Spirits |
|
No effect |
No effect |
No effect |
No effect |
| Xylene |
|
No effect |
No effect |
No effect |
No effect |
| Acetone |
|
No effect |
No effect |
No effect |
No effect |
| Propylene
Carbonate |
|
No effect |
No effect |
No effect |
No effect |
| Ethanol |
|
No effect |
No effect |
No effect |
No effect |
| DMSO |
|
No effect |
No effect |
No effect |
No effect |
| Motor
Oil |
|
No effect |
No effect |
No effect |
No effect |
|
|
|
|
|
| Acid/Bases |
|
| Hydrochloric
Acid 35% |
|
No effect |
No effect |
See
notes below |
| Nitric
Acid 68% |
|
No effect |
No effect |
No effect |
No effect |
| Sulfuric
Acid (conc.) |
|
No effect |
No effect |
No effect |
No effect |
| Acetic
Acid 99.5% |
|
No effect |
No effect |
No effect |
No effect |
| Hydrogrn
Peroxide 30% |
|
No effect |
No effect |
No effect |
No effect |
| Sodium
Hydroxide 25% |
|
No effect |
No effect |
No effect |
No effect |
| Ammonium
Hydroxide 20% |
|
No effect |
No effect |
No effect |
No effect |
|
|
|
|
| Other |
|
| Boiling
H2O |
|
Soaked
in boiling water for 1 hr. - no effect |
| LN2
(Cold) |
|
Dipped
in liquid nitrogen - no effect |
| Flame
(Hot) |
|
Heated
in propane flame until cherry red - metal |
|
discolors,
no effect on mark. |
| Hot/Cold
Cycling |
|
Marks
heated red hot and immediately plunged in liquid nitrogen |
|
-
metal discolors, no effect on mark |
|
|
| Notes: |
|
|
| Hydrochloric
acid testing: |
|
-
Acid dissolves the steel tag and was not run over 12 hrs. long |
|
-
After 1 hr. acid dissolved 0.2767 gms off of steel tag (4.7%), |
|
laser
mark was unaffected. |
|
-
After 12 hrs. acid dissolved 1.8057 gms off of steel tag (30.6%), |
|
laser
mark was unaffected, now having a distinctly raised feel. |
|
| Sulfuric
acid testing: |
|
-
Acid discolors at approximately 96 hrs., mark appears to be |
|
slightly
discolored. |